Find 10/100/100M Managed Ethernet Switch,10/100/100M Managed Fiber Switch,Gigabit L2 Managed Ethernet Switch on Industry Directory, Reliable Manufacturer/Supplier/Factory from China.

Inquiry Basket (0)
Home > Products > Out-door Fabric > Flag And Flag Fabric > 10/100/100M managed ethernet switch

10/100/100M managed ethernet switch

10/100/100M managed ethernet switch

    Payment Type: L/C,T/T,Paypal,Western Union
    Terms of Trade: FOB,CIF,EXW
    Min. Order: 1 Piece/Pieces
    Delivery Time: 4 Days
    Packaging: carton
    Productivity: 50000
    Brand: N-net
    Transportation: Ocean,Land,Air,express
    Place of Origin: China
    Supply Ability: 50000
    Certificate: CE,FCC,ISO9001
    HS Code: 8536700000
    Port: Shenzhen,Yantian

Basic Info

Model No.: NT-35M22T2GC2GF

Communication Mode: Full-Duplex & Half-Duplex

Type: Optical Switch

Transmission Rate: 10/100/1000Mbps

Ports: 24

Din-rail: Managed

Product Description



To satisfy the increasing demand of PoE for Gigabit Ethernet (GbE) networking, N-net has developed this series of PoE GbE switch. The NT-35MG22T2GC2GFL provides an ideal solution for LAN implementation.


This product is equipped with (24)10/100/1000M Base-T Gigabit Ethernet RJ45 ports, supporting IEEE 802.3af/ at standard, and 1000Base-X SFP interfaces. support PoE status display (including the port output power, short-circuit protection, overload port / light load, PoE off, PoE the total power, and power supply overvoltage / low pressure / alarm). The scroll mode shows the port state, showing the 8 port POE state of a page, the residence time is about 5S, according to the data display real-time updates PD end user POE power, state monitoring and troubleshooting, and simplifies the wiring, avoid the power socket of the power supply equipment.


The NT-35MG22T2GC2GFL supports 440-watt PoE budget to drive up to 24 powered devices, with up to 30W of MAX power per port. The PoE feature enables the NT-35MG22T2GC2GFL an efficient and cost-effective solution for SMB, SOHO or Other similar fields to deploy the PoE network for the wireless access points, IP-based surveillance cameras or IP phones anywhere easily and efficiently.



Built-in efficient switching core to implement flow control and reduce broadcast packets

Standard Compliance:IEEE802.3 Ethernet,

IEEE802.3u Fast Ethernet,

IEEE802.3ab Gigabit Ethernet

IEEE802.3x Flow Control,

IEEE 802.1p QoS

10/100/1000Mbps auto-negotiation and auto MDI/MDI-X, compatible with various Ethernet devices

Support L2+ Switching features including 802.1Q VLAN, Mirroring, Port isolation, IGMPSnooping,

DHCP Snooping, LLDP, POE+ management, IP Source Guard, ARP inspection, ACLs etc.

Store-and-forward mechanism is employed to avoid packet loss and error frames

Support spanning tree STP(802.1D) and RSTP(802.1W).

G.8032, support <50ms industrial quick ring protection

Jumbo frames support a maximum of 9.6K kilobtyes

Support cable diagnosis

Support enhanced management through WEB, CLI, TELNET, SSH, SNMP.

0 ºC To 55 ºC operating temperature to meet a variety of complex environments

Copper ports support ESD protection

Support PoE power supply up to maximum of 30W per port

IEEE 802.3af and 802.3at. Supports per port PoE configuration function


Hardware Specification



 Access mode



  IEEE802.3 Ethernet, IEEE802.3u Fast Ethernet, IEEE802.3ab Gigabit Ethernet,

  IEEE802.3x Flow Control, IEEE 802.1p QoS

  IEEE 802.1D STP, IEEE 802.1w RSTP,

  IEEE802.3af PoE, IEEE802.3at PoE+,

 10/100/1000 Base-T ports

 24 ports  EIA568A/B

 1000 Base-X

 4 ports SFP ( 2 SFP port are COMBO ports)

 Conversion means

 Store and Forward

 Switch Fabric


 Switch Throughput

 38.6Mpps@64 bytes

 G.8032 ERPS

<50ms ring protection for industrial high reliable application

 Address table



Support up to 4K VLANs simultaneously (out of 4096 VLAN IDs)

Port-based VLAN

802.1Q tag-based VLAN


Link Aggregation Control Protocol (LACP) IEEE 802.3ad

Up to 12 groups

Up to 16 ports per group


 30,000 hours

 LED indicator

Power : PWR    (1~24)UTP Port: SPD, L/A, PoE ,SFP:

LCD Display(Option)

User-friendly interface, real-time displays the system power, PSE POE power and its working conditions.The scroll mode shows the port state, showing the 8 port POE state of a page, Flip the time is about 5S, according to the data display real-time updates PD end user POE power, state monitoring and troubleshooting.

 Power supply

  Power Input Range: 100~240V AC            

 Power Requirement

 100~240V AC, 50/60Hz, 4A

 Power Capacity


 PoE Power Pins

 RJ45 Pins 1 and 2 for PoE(+); 3 and 6 for PoE(-)

 Operating temperature

 0 ºC ~+55ºC

 Operating humidity

 5%~90%  non-condensing

 Storage Temperature


 Storage humidity

 5%~90%  non-condensing


 440 x 290 x 44.5 (mm)




Layer 2 Function 



 Port Configuration

  Port disable / enable
  Auto-negotiation 10/100/1000Mbps full and half duplex mode selection

Flow Control disable / enable

 Port Status

  Display each port`s speed duplex mode, link status, flow control status, auto   negotiation status and trunk status

 Port Mirroring

  TX / RX / Both
  Many-to-1 monitor

Port Security

  Locks MAC Addresses to ports, and limits the number of learned MAC



  Support for up to 256 entries

Drop or rate limitation based on source and destination MAC, VLAN ID

or IP address, protocol, port, differentiated services code point (DSCP) /

IP precedence, TCP/ UDP source and destination ports, 802.1p priority,

Ethernet type, Internet Control Message Protocol (ICMP) packets, IGMP

packets, TCP flag

 Link Aggregation

  1 group of 2-Port 10/100/1000Base-T trunk supported


  Allow to assign low / high priority on each port
  First-In-First-Out, All-High-before-Low, Weight-Round-Robin QoS policy

 IGMP (v1/v2) Snooping

  IGMP limits bandwidth-intensive multicast traffic to only the requesters;

supports 1024 multicast groups (source-specific multicasting is also


 Security Control

  MAC address binding
  TCP & UDP filter


Management Functions 



  Basic Management Interfaces

  Web Browser, SNMP v1


1. Front board have 29 ports, Provide 24x 10/100/1000Mbps downlink PoE Ethernet Ports, 2x 10/100/1000Mbps uplink Ethernet COMBO ports and 2x1000Mbps uplink SFP Ports, and 1x console ports.

2. LED Indicator State:

Power:  1 Green light indicates that the power normal work;

SFP: 2 Green lights indicate that the SFP ports is enable

POE:    24 Green lights indicate that the POE is power on;

Ethernet: 24 Green lights indicate 10/100M Ethernet link and speed;

Ethernet: 24 Green lights indicate 10/100M/1000M Ethernet link and speed;

 POE switch LCD indicator

Installation step

Please check below device and accessories before installation, if there are missing, please contact with your supplier.

1. PoE Switch                         1PCS

2. User Manual                        1PCS


◆ Please turn off the signal source and the device's power before installing, installation with power on may damage the device;

◆ Use 24 network cables to connect 24 IP cameras with Ethernet switch's 1~24 PoE port;

◆ Use network cable to connect Ethernet switch`s UPLINK port with NVR or Other Device;

◆ Check if the installation is correct and device is good, make sure all the connection is reliable and power for the system;

◆ Connect the power outlet and the switch with the power cord.

◆ Make sure every network device has power supply and work normally.


managed POE switch

Order information




Management Gigabit Ethernet PoE+ Switch, (22) 10/100/1000Mbps downlink PoE Ethernet Ports, (2) 10/100/1000Mbps uplink Gigabit COMBO Ports, and (2) 1000Mbps uplink SFP Ports, POE output IEEE802.3af standard 440W

  • 1
  • 2
  • 3
  • 4
  • 5
 N-net Technology Co., Limited is one of the powerful and Hi-Tech companies specializing in the integration of R&D, manufacturing and marketing of optical fiber communication and Security solution. The main products include: commercial/industrial fiber media converter series, commercial/industrial fiber switches, GEPON series, fiber video converter series, EOC series and the security monitoring core system, etc. Since the establishment in 2001, N-net has built its reputation in the high quality of products and services, and the leadership in innovation.

Company Info

  • Company Name: Shenzhen N-net Technology Co.,Ltd
  • Representative: Gaoyu Wu
  • Product/Service: POE Switch , Network Switch , Media Converter , Industrial Switch , Fiber Switch , EOC
  • Capital (Million US $): 1000000RMB
  • Year Established: 2001
  • Total Annual Sales Volume (Million US $): Above US$100 Million
  • Export Percentage: 61% - 70%
  • Total Annual Purchase Volume (Million US $): US$50 Million - US$100 Million
  • No. of Production Lines: 15
  • No. of R&D Staff: 31 -40 People
  • No. of QC Staff: 11 -20 People
  • OEM Services Provided: yes
  • Factory Size (Sq.meters): 1,000-3,000 square meters
  • Factory Location: 5-6 floor, C Building, Yiyuantong Industrial Zone,Xuexiang Community, Bantian, Longgang District, Shenzhen, 518000, China
  • Contact Person: Ms. Milla Lin
  • Tel: 86-755-83874688
Email to this supplier
  • *Subject:
  • To:
    Karl Qiu
    Mr. Karl Qiu
  • *Messages:
    Your message must be between 20-8000 characters